GM-402B MEMS Combustible Gas Sensor
For combustible gas leakage monitoring devices, gas leak detectors and fire / security detection system
Applications :
*Gas leak detection for mobile phones, computers and other consumer electronics applications
*home, commercial use of the combustible gas leakage monitoring devices
*gas leak detectors
*fire / security detection system
Product Advantages:
- *MEMS technology, Strong construction
- *Good shock resistance
- *Small sizes and low power consumption
- *Fast response and resume
- *Simple drive circuit, Long lifespan
Product Description:
MEMS combustible gas sensor is using MEMS micro- fabrication hot plate on a Si substrate base, gas-sensitive materials used in the clean air with low conductivity metal oxide semiconductor material. When the sensor exposed to gas atmosphere, the conductivity is changing as the detected gas concentration in the air. The higher the concentration of the gas, the higher the conductivity. Use simple circuit can convert the change of conductivity of the gas concentration corresponding to the output signal.
Technical Parameters:
| Part No. | GM-402B | ||
| Sensor Type | MEMS | ||
| Standard Encapsulation | Ceramic | ||
| Detection Gas | CH4, C3H8 &etc. | ||
| Detection Range | 1~10000ppm (CH4) 1~10000ppm (C3H8) | ||
| Standard Circuit Conditions | Loop Voltage | Vc | ≤24V DC |
| Heater Voltage | VH | 2.8V±0.1V AC or DC | |
| Load Resistance | RL | Adjustable | |
| Sensor character under standard test conditions | Heater Resistance | RH | 80Ω±20Ω（room temperature） |
| Heater consumption | PH | ≤80mW | |
| sensitive materials resistance | RS | 1KΩ～30KΩ(in 5000ppm CH4) 1KΩ～30KΩ(in 2000ppm C3H8) | |
| Sensitivity | S | R0(in air)/Rs(in 5000ppmCH4)≥3 R0(in air)/Rs(in 2000ppmC3H8)≥3 | |
| Standard test conditions | Temp. Humidity | 20℃±2℃；55%±5%RH | |
| Standard test circuit | VH:2.8V±0.1V；VC :5.0V±0.1V | ||
Related Products
LEAVE A MESSAGE
Please send us your questions or inquiries via the form below and we will get back to you within 24 hours.