GM-102B MEMS NO2 Gas Sensor
For the fixed or portable NO2 detector or alarms
Applications :
*fixed or portable NO2 detector
*fixed or portable NO2 alarms
Product Advantages:
- *MEMS technology, Strong construction
- *High sensitivity to NO2 gas
- *Small sizes and low power consumption
- *Fast response and resume
- *Simple drive circuit, Long lifespan
Product Description:
MEMS NO2 gas sensor is using MEMS micro-fabrication hot plate on a Si substrate base, gas-sensitive materials used in the clean air is low conductivity metal oxide semiconductor material. When the sensor exposed to gas atmosphere, the conductivity is changing as the detected gas concentration in the air. The higher the concentration of the gas, the higher the conductivity. Use simple circuit can convert the change of conductivity of the gas concentration corresponding to the output signal.
Technical Parameters:
| Part No. | GM-102B | ||
| Sensor Type | MEMS | ||
| Standard Encapsulation | Ceramic | ||
| Detection Gas | NO2 | ||
| Detection Range | 0.1~10ppm (NO2) | ||
| Standard Circuit Conditions | Loop Voltage | Vc | ≤24V DC |
| Heater Voltage | VH | 2.0V±0.1V AC or DC | |
| Load Resistance | RL | Adjustable | |
| Sensor character under standard test conditions | Heater Resistance | RH | 80Ω±20Ω（room temperature） |
| Heater consumption | PH | ≤40mW | |
| sensitive materials resistance | RS | 10KΩ～1000KΩ(in 2ppm NO2) | |
| Sensitivity | S | R0(in air)/Rs(in 2ppm NO2)≤ 0.5 | |
| Standard test conditions | Temp. Humidity | 20℃±2℃；55%±5%RH | |
| Standard test circuit | VH:2.0V±0.1V； VC :5.0V±0.1V | ||
Related Products
LEAVE A MESSAGE
Please send us your questions or inquiries via the form below and we will get back to you within 24 hours.