WHT20 MEMS type Temperature and Humidity Sensor

Applications :

*Home appliance fields: home appliance, humidity control, HVAC, dehumidifiers, smart thermostats, and room monitors etcs;
*Industrial fields: automobiles, testing equipment, and automatic control devices;
*Other fields: data loggers, weather stations, medical and other related temperature and humidity detection devices.

Product Advantages:
  • *Fully calibrated
  • *±2.0% RH and ±0.3℃ Accuracy
  • *Wide power supply voltage range, from 2.0V to 5.5V
  • *SMD package suitable for reflow soldering
  • *Temperature and humidity parallel measurement on different pins
  • *Quick response and strong anti-interference ability
  • *Excellent long-term stability under high humidity condition
Product Description:

WHT20 is embedded in a dual-row flat no-lead SMD package, which is suitable for reflow soldering, with 3.0x3.0mm bottom surface and 1.0mm height. The temperature and humidity signals can be read on different pins. The sensor outputs calibrated digital signals in standard IIC format. WHT20 is equipped with an ASIC chip, a MEMS capacitive humidity sensor and a temperature sensor. WHT 20 temperature and humidity sensors have been calibrated and tested on factory, and have excellent reliability and long-term stability.

Technical Parameters:
Parameter Condition Min Typical Max Unit
Resolution Typical 0.01 %RH
Accuracy error1 Typical ±2.0 %RH
Max See figure2 %RH
Repeatable ±0.1 %RH
Hysteresis ±1.0 %RH
Non-linear <0.1 %RH
Response time2 t63% 8 s
Scope of work extended3 0 100 %RH
Prolonged Drift4 Normal <0.5 %RH/yr
The Latest Manual
LEAVE A MESSAGE

Please send us your questions or inquiries via the form below and we will get back to you within 24 hours.

Cannot find what you are looking for?

Write an email to us to consult about your special project, we will assist you to realize your dream product to reality.

Home Tel Mail Inquiry